Product: Hot Air Rubber Melter
Capacity: 1 Drum - 55 Imperial gallons approx.
Mounted On: 2 No.150mm swivel/braked casters
2 No. 150mm fixed casters
Main Body Frame: 40 x 40 x 2 mm RHS
Outside Case: 2mm mild steel sheet
Pan: Half diameter type 4 mm mild steel plate
Pan End Plates: Profile – 6mm Plate
Link/Gearbox Arms: Profile
Insulation: High temperature Rockwool dense slab - encased
Drive: 110-volt electric motor coupled to gearbox
Power: 110-volt supply – 16amp
Stirrer Shaft: 40 mm bright mild steel round
Bearings: 2 bolt self-aligning 40 mm pillar block
Agitation: Oscillating continuous paddle
Firing: LPG propane gas
Burner Firing Tube: 4.000 NB SCH40 304 stainless steel pipe.
Flue Return Tube: 114.0 x 6mm mild steel
Thermostat: Electric Digital
Temperature Control: Electric Digital
Burner: 1 No. high-capacity open nozzle type burner
Outlet: Gate type
Lifting: 4 No M20 eyebolts
4 No 3.25 tonne shackles
Length: 1900 mm
Width: 920 mm
Loading Height: 865 mm
Overall Height: 1430 mm
Unladen Weight: 480 kg
This specification and any drawings/images related to it are the sole copyright of WJ Horrod Ltd, and must not be passed to a third party without prior consent of WJ Horrod Ltd.
WJ Horrod Ltd also reserve the right to alter, change or modify this product to improve it without prior notice.