Specification

 

 

Product: Hot Air Rubber Melter

 

Capacity: 3 Drum - 165 imperial gallons approx.

 

Type: Digital thermostat control 110-volt electric drive

 

Casters: 2 No. 200mm swivel/braked cast iron

2 No. 200mm fixed cast iron

 

Construction:

 

Main Body Frame: 40 x 40 x 2mm SHS

 

Outside Case: 2mm mild steel sheet

 

Link/Gearbox Arms: Profiled.

Pan: Half diameter type 5 mm mild steel plate

 

Pan End Plates: Profiled 6mm mild steel plate

 

Insulation: High temperature Rockwool dense slab - encased

 

Drive: 110-volt electric motor coupled to gearbox

Power: 110-volts 32amp

 

Stirrer Shaft: 60 mm bright mild steel round

 

Stirrer Shaft

Bearings: 2 No. heavy duty self-aligning 60 mm pillar blocks

 

 

 

 

 

 

 

 

 

 

Agitation: Oscillating continuous paddle

 

Firing: LPG propane gas

 

Burner: Open nozzle type, 2 No. 50 mm

 

Burner Tubes: 4.000 NB SCH40 304 stainless steel pipes

 

Flue Return Tubes: 114.0 x 6mm mild steel

 

Material Outlet: Gate type

 

Temperature

Control: Digital Electric thermostat control.

 

Temperature Gauge: Digital

 

Lifting Facilities: 4 No. certified M20 metric collared eyebolts

4 No certified 3.25t shackles

 

Overall Shipping Dimensions:

 

Overall length: 2470mm

Width: 1225mm

Overall height: 1700mm

Working height: 1025mm

Weight: 1000kg

 

All sizes and weights are approx.

 

This specification and any drawings/images related to it are the sole Copyright of WJ Horrod Ltd and must not be passed to a third party without prior consent.

 

WJ Horrod Ltd also reserves the right to alter, change or modify this equipment to improve it without prior notice.