Specification

 

Product: Hot Air Rubber Melter

 

Capacity: 1 Drum - 83 Imperial gallons approx.

 

Type: Digital Thermostat Control 110 Volt Electric Drive

 

Mounted On: 2 No.200mm swivel/braked Cast Iron casters

2 No. 200mm fixed Cast Iron casters

Construction:

 

Main Body Frame: 40 x 40 x 2 mm SHS

 

Outside Case: 2mm mild steel sheet

 

Pan: Half diameter type 4 mm mild steel plate

 

Pan End Plates: Profiled 6mm Plate

 

Insulation: High temperature Rockwool dense slab - encased

 

Drive: 110-volt electric motor coupled to gearbox

 

Power: 110-volt supply 16amp

 

Stirrer Shaft: 40 mm bright mild steel round

 

Stirrer Shaft

Bearings: 2 bolt self-aligning 40 mm pillar block

 

Agitation: Oscillating continuous paddle

 

 

 

 

 

Firing: LPG propane gas

 

Burner Firing Tube: 4.000 NB SCH40 304 stainless steel pipe

 

Flue Return Tube: 114.0 x 6mm mild steel

 

Thermostat: Electric Digital Thermostat Control

 

Temperature Control: Electric Digital

 

Burner: 1 No. high-capacity open nozzle type burner

 

Outlet: Gate type

 

Lifting: 4 No M20 eyebolts

4 No 3.25 tonne shackles

 

Length: 2470 mm

Width: 860 mm

Loading Height: 880 mm

Overall Height: 1415 mm

Unladen Weight: 780 kg

 

 

This specification and any drawings/images related to it are the sole copyright of

WJ Horrod Ltd, and must not be passed to a third party without prior consent of

WJ Horrod Ltd.

 

WJ Horrod Ltd also reserve the right to alter, change or modify this product to

improve it without prior notice.