Specification

 

 

 

Product: Hot Air Rubber Melter.

 

Capacity: 1.5 Drum - 83 Imperial gallons approx.

 

Type: Digital Thermostat Control 110-volt electric drive.

 

Mounted On: 2 No. 200mm swivel/braked cast iron casters.

2 No. 200mm fixed cast iron casters.

 

Main Body Frame: 40 x 40 x 2 mm SHS.

 

Outside Case Sheet: 2 mm mild steel sheet.

 

Pan: Half diameter type 4 mm mild steel plate.

 

Pan End Plates: Profiled 6mm mild steel plate.

 

Insulation: High temperature Rockwool dense slab - encased.

 

Drive: 110-volt electric motor coupled to gearbox.

 

Power: 110 volts 16amp.

 

Stirrer Shaft: 40 mm bright mild steel round.

 

Stirrer Shaft Bearings: 2 bolt self-aligning 40 mm pillar block.

 

Agitation: Oscillating continuous paddle.

 

Firing: LPG propane gas.

 

 

 

 

 

 

 

 

 

 

Burner: 1 No. high-capacity open nozzle type burner.

 

Burner Firing Tube: 4.000 NB SCH40 304 stainless steel pipe.

 

Flue Return Tube: 114.0 x 6mm mild steel.

 

Outlet: Gate type.

 

Temperature Control: Digital electric thermostat control.

 

Temperature Gauge: Digital.

 

Length: 2470 mm

 

Width: 860 mm

 

Loading Height: 880 mm

 

Overall Height: 1415 mm

 

Unladen Weight 780 kg.

 

 

This specification and any drawings/images related to it, are the sole Copyright of

WJ Horrod Ltd and must not be passed to a third party without prior consent

of WJ Horrod Ltd.

 

WJ Horrod Ltd also reserve the right to alter, change or modify this product

to improve it without prior notice.